Filters and sort order
16 Items
under categorie
- Accesories
- Care
- Cleaners and sugar dissolving oils
- Fluid grease
- Gear oil
- Graphite grease
- grease
- Heat transfer oil
- High pressure greases
- High speed greases
- High temperature greases
- Hydraulic oil
- Long-term fats
- Multi-purpose grease
- Organic grease
- paste
- Special cleaner
- Spray
- White oil
- Cooling lubricants
- Automatic transmission fluid
- cutting oil
Specifications
- DIN 51 524 Teil 2
- HLP
- DIN 51 524 T.3
- DIN 51 517 T.3 (CLP)
- CLP
- DIN 51 825
- AFNOR NF-E 48603
- SEB 181 222
- VDMA 24318
- Vickers M-2950-S
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- CETOP RP91H
- Vickers I-286-S3
- David Brown S1.53.101 (E)
- Denison Hydraulics HF-2
- DIN 51 524
- U. S. Steel 126
- U. S. Steel 127
- David Brown S1.53.101
- DIN 51 826
- ISO 12925-1 - CKD
- ISO/DIS 6743-9
- NSF H1
- ANSI/AGMA 9005-E02
- ISO 11158
- DIN 51 517 Teil 2
- AGMA 9005 E02
- AISE 224
- ISO 12925-1 - CKC
- ISO 15380
- CL
- AIST No. 224
- Danieli Standard n. 0.000.001 Rev.15
- David Brown S1.53.101 (5E)
- HVLP
- ISO 12925-1 CKD
- VDMA 24568
- ISO 6743/3 DAB
- ISO 6743/2 FC (MV 10)
- Morgan Morgoil Revision 1.1-2005
- BS 4231 HSC
- CETOP RP 91 H HL
- DIN 51517 T.2 CL
- HLP-D
- ISO-L-CKD
- ASTM D6158
- JCMAS P041 HK
- AIST 126 + 127
- SAE MS1004
- GM LS 2
- Sauer Danfoss 520L0463
- Linde
- ANSI/AGMA 9005-F16
- ISO 11158 HL
- DIN 51524-1 HL
- AFNOR NF E 48600 HL
- CETOP RP 91 HM
- DIN 51 502 CGLP
- DIN 51 517 T.1 C
- DIN 51506 VCL
- ISO-L-DAB
- AISE 127
- ISO 15380 HEES
- AFNOR NF E 48603 HM
- BS 4231 HSD
- P69 und P70
- DIN 51 825: KP 2 K-30
- DIN 51506-VDL
- ISO 12925-1 CKB
- K 2 K-30
- KPF 2 K-30
- Kosher
- Halal
- ISO 21469
- FDA 21 CFR
- DIN 51 502 – PGLP (CLP-PG)
- ISO 12925-1 CKE/CKT
- Sacmi 200.02.A01
- Loesche
- ISO 12922 HFD-U
- Inline Hydraulik GmbH
- Rexroth RD 90221-01/03
- Hoerbiger Micro fluid
- VII Report of Luxemburg
- European Pharmacopoeia
- Ufficial Italian Pharmacopoeia: X Edition
- USA FDA, 21 CFR 172.878
- USA FDA, 21 CFR 178.3620(a)
- DIN 51 825: KP 3 K-30
- DIN 51 825: KP 1 K-30
- DENISON HF-0
- DIN 51 825 T.3
- DIN 51506
- ETON Vickes I-286-S
- HEES
- ISO 6743-9
- KP 2 K-30
- ISO 11158 (HV Flüssigkeit)
Applied in
- Agriculture and Forestry
- automatic lubrication devices
- Bearing lubrication on rotary tables
- Central lubrication systems
- Chip chucks in machine tools
- Circular saws, angle grinders
- Food and pharmaceutical industries
- Generators, electric motors, fans, etc
- highly loaded plain and rolling bearings
- Mining, air, sea
- Motor vehicles, construction and agricultural machinery
- Plain and rolling bearings
- Poclain construction machinery
- Power harrows
- Presses for body parts
- Roller lubrication of linear guides on machine tools
- Tapered roller bearings or spherical roller bearings
- transmission
- Wet or dusty environment
Approvals, recommendations
- Alison C-3
- Allison C-4
- ALSTOM HTDG 90117 V0001 X
- Ansaldo Energia 606W807 Rev.C (2012)
- Ansaldo Energia W 3.1-0171-I6000
- ASLE 70-1
- ASLE 70-2
- ASLE 70-3
- ASTM D 4304 Type I
- ATOS Tab. P 002-0/1
- Baier+Köppel (Bekamax)
- Bekamax
- Bosch Rexroth RD 90220
- BS 489:1999
- Caterpillar TO-2
- Caterpillar TO-4
- Caterpillar TO-4M
- CEI 10-8 (1994)
- CETOP PR91H
- CINCINNATI MILACRON P74
- CINCINNATI MILACRON P77
- CNH MAT 3630
- DANA Powershift transmission
- Danieli 0.000.001
- Danieli Standard 0.000.001 Rev. 14 A01.3.1b-Type1
- David Brown S1.53.101
- De Limon Flume
- Denison HF-0
- Denison HF-1
- Denison HF-2
- Deutsche Tecalemit
- DIN 51515-1 TD
- Doosan Skoda Power
- Eaton
- Fives Cincinnati P-68 (ISO 32)
- GE GEK 28143B
- HORBIGER HYDRAULIK
- ISO 4113-CV-AW
- ISO 8068 TSA/TGA
- ITN52220.02
- ITN52220.03
- IVECO 18-1823
- JCB-Standard 2500
- JCB-Standard 4000
- JIS K 2213 -1983 Type II
- Knorr-Bremse N 12006-37
- Komatsu KES 07.868.1
- Krauss Maffei
- LEMO
- Lincoln
- MAN
- MAN 283
- MAN 283 LI-P 00/000
- MAN N 698
- MAN-Norm 283 Li-P 2
- MB 264
- MB 267.0
- Mercedes-Benz
- MIL-L-2104-D
- MIL-L-46452-C
- Mitsubishi Spec. NO. E00-001 Rev.2
- NATO-Code G 421
- Nuovo Pignone SOM 17366
- Rexroth RD 90220-01/12.10
- REXROTH RD 90220-1/11.02
- Romanco Kilian (SH 32)
- Siemens TLV 9013 04
- US Steel 126
- US Steel 127
- Vickers I-286-S3
- Vickers M-2950-S
- Vogel
- VS 15665-OL
- Willy Vogel
- Willy Vogel AG
- ZF TE-ML 03C
- ZF TE-ML 04R
- ZF TE-ML 07F
- ZF TE-ML 12
- Rexroth RDE 90245
- Rexroth RDE 11003
- Rexroth RDE 11004
- Rexroth RDE 110068
- TL 9150-0066
- Nato Code G-460
- DTFR 33B120
- Renault 03-80-200 / P, Kategorie 47 - A
- BPW Eco-Li-91
- TL 9150-0075/2
- DTFR 33B100
- Sperry Vickers M2905S & I-280S
- JCB-Standard 2600
- Komatsu Micro Clutch
Grease type
- Aluminum complex soap grease
- Barium complex soap
- Bio grease
- Calcium complex soap grease
- Calcium saponified fat based on mineral oil
- Calcium soap grease
- Flonium grease
- Fluid grease
- Gear fluid grease
- Grease paste
- High temperature grease
- KP 2 R-20
- Lithium calcium soap base
- Lithium complex grease
- Lithium complex soap grease
- Lithium saponified
- Lithium soap grease
- Long-Time grease
- Low temperature grease
- Sodium soap grease
- with MoS2
danger_component
- ethanediol 1
- Hydrocarbons 4
- n-alkanes 3
- Cycloalkanes 3
- Isoalkane 5
- Cyclene 2
- less than 2% aromatics 2
- C6-C7 2
- less than 5% n-hexane 2
- Naphtha (petroleum) 2
- treated with hydrogen, heavy 2
- C14-C18 2
- Aromatics (2-30%) 2
- C10-C13 1
- Distillates (petroleum) 5
- treated with hydrogen, lightweight 2
- Naphthenic acids 1
- zinc salts 1
- 1,2-Benzisothiazol-3(2H)-on 1
- Lubricating oils (petroleum) 2
- white mineral oil (petroleum) 1
- Ethylene glycol 2
- Distillates (petroleum), hydrotreated light paraffinic 1
- 2-amino-2-ethylpropanediol 1
- Polysulfides 1
- Di-tert-dodecyl-Pin-2 1
- Polypropylene glycol 1
- Potassium 2-ethylhexanoate 1
dangers_safety instructions
- P101 19
- P102 34
- P103 5
- P201 1
- P202 1
- P210 10
- P211 9
- P251 9
- P260 8
- P261 8
- P264 34
- P270 4
- P271 4
- P272 1
- P273 52
- P280 52
- P301 + P310 26
- P301 + P312 2
- P301 + P330 + P331 2
- P302 + P352 16
- P303 + P361 + P353 1
- P304 + P340 5
- P305 + P351 + P338 34
- P308 + P313 4
- P310 4
- P312 5
- P321 5
- P330 2
- P331 26
- P332 + P313 11
- P333 + P313 7
- P337 + P313 29
- P362 17
- P391 6
- P403 + P233 2
- P403 + P235 1
- P405 16
- P410 + P412 9
- P501 64
more filters
Standard multi-purpose grease on lithium soap for rolling and plain bearings.
- SKU: 10733V
- Variations in: container size
High-quality multi-purpose grease based on lithium soap.
- SKU: 37330_V
- Variations in: container size
Eni Longtime Grease 2 is based on lithium-calcium-soap basis with synthetic base oil and EP additives.
- SKU: 6467V
- Variations in: container size
Divinol Mehrzweckfett 2 is suitable for the lubrication of slide and roller bearings at normal loads.
- SKU: 22971
- Variations in: container size
Divinol GWA ISO 22 is used in hydraulic and mechanical gears, also with electro-multi-disk clutches, in hydraulics, in roller and slide bearings etc.
- SKU: 48760
- Variations in: container size
Divinol GWA ISO 32 is used in hydraulic and mechanical gears, also with electro-multi-disk clutches, in hydraulics, in roller and slide bearings etc.
- SKU: 48770
- Variations in: container size
Eni Arnica S is a high performance hydraulic oil, specifically designed for hydraulic systems operating in areas where there is a fire hazard owing to the presence of very high temperatures, such as in rolling mills or when other sources of ignition are present such as electric arc and welders.
- SKU: 256040V
- Variations in: container size
Eni Arnica S is a high performance hydraulic oil, specifically designed for hydraulic systems operating in areas where there is a fire hazard owing to the presence of very high temperatures, such as in rolling mills or when other sources of ignition are present such as electric arc and welders
- SKU: 6377V
- Variations in: container size
Eni Arnica 32 is a high performance antiwear hydraulic oil, specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
- SKU: 64818V
- Variations in: container size
Divinol GWA ISO 3 wird eingesetzt in hydraulischen Hebezeugen, schnelllaufenden, enggepassten Arbeitsspindeln mit hydrodynamischen und hydrostatischen Lagern, in Schleifmaschinen und leichten Werkzeugmaschinen usw.
- SKU: 20001
- Variations in: container size