Divinol B Classic, 20 Liter

Universal release agent for all kind of formworks. Also usable as mixer protection.

PRODUCT DESCRIPTION:

• non-water-miscible multi-purpose concrete release agent based on mineral oil
• VOC-free
• no discoloration of the concrete surface
• very economical in use
• free of waxes and silicones

APPROVAL:

As part of a DGNB certification, Divinol B Classic can be used for quality levels 1 (according to the catalog of criteria ENV 1.2 - risks to the local environment).

APPLICATION:

Divinol B Classic is used for all types of formwork commonly used in concrete plants and building construction:

Divinol B Classic for non-absorbent or slightly absorbent formwork, such as phenolic resin formwork, etc. and for pre-treated Wooden formwork, as well as for plastic-coated formwork skins and prefabricated parts in the infrastructure sector.

Divinol B Classic has proven itself in the production of paving and wall stones as well as paving slabs.

If Divinol B Classic is used correctly, direct contact of the formwork with the concrete surface is prevented. This prevents surface damage to the concrete and eliminates the need for rework. The service life of the formwork is extended and thus the general cost-effectiveness. There is also no danger to the environment if used as directed.

When used correctly, the further treatment of the concrete surface (plaster, ceramics, wallpaper, paint) is not negatively affected.

Divinol B Classic is easy to apply when delivered by spraying, brushing or rolling.

STORAGE:

Divinol B Classic is not sensitive to frost and can be used without any problems at all weather conditions. Any thickenings at temperatures below 0°C are reversible. Protect from strong sunlight. Store opened containers closed. Shelf life of at least 3 years if stored properly.

MISCELLANEOUS:

Consumption:

Depending on the type of formwork (absorbent, non-absorbent) approx. 8-30 g/m².

Processing:

The formwork must be pre-cleaned and dry. Divinol B Classic is sprayed evenly and thinly with a highpressure sprayer at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.