Description

eni Antifoam SH 2 is a silicone oil free defoamer for water mixed cooling lubricants based on polyether siloxane.

Properties and Performance:

silicone oil free defoamer
does not contain hydrophobic methyl siloxane
does not form separating films and therefore does not influence the following processes such as cleaning, varnishing or galvanizing
based on polyether siloxanen
optimum defoaming effect
a part of the additive is dragged out with the skimmer-oil

Applications:

Eni Antifoam SH 2 is used as defoamer for water mixed cooling lubricants. A suspension in water, pre-dilution 1:10, is recommended.

The required application concentration depends on the respective conditions (e.g. cooling lubricant used, desired effect, etc.). As a rule, the addition of approx. 0.01 % is sufficient. If necessary, however, the quantity added can be increased step by step to 0.1 %.

Indications:

The product complies with the requirements of TRGS 611 section 4. For the application please the applicable VDI guidelines 3035 and 3397 (1-3) as well as the specifications of TRGS 611 section 5. When mixing, always add the concentrate to the preparation water provided. A more homogeneous emulsion can be achieved by using mixing equipment. In order to the functionality of the product, frost-free storage is necessary. The product is a liquid hazardous to water.

Occupational health precautions must be taken in accordance with GefStoffV §15, §16 and Appendix V.be taken into account. DGUV regulation 109-003 - Activities involving cooling lubricants (previously: BGR/GUV-R 143) - is to be applied for safe handling.

For further information, please contact our application engineering department. Inform yourself about the range of seminars on the subject of cooling lubricants.