Divinol High Liquid Surface

High-quality concrete release agent for exposed concrete in civil engineering for polypropylene and plastic formwork

PRODUCT DESCRIPTION:

• non water-miscible concrete release agent latest generation
• hydrophilic
• free of solvents
• free of silicone and wax
• reduces formation of pores and shrinkholes
• no discolouration of the concrete surface
• economical consumption

APPROVAL:

As part of a DGNB certification, Divinol High Liquid Surface can be used for quality level 1 (according to the catalog of criteria ENV 1.2 - risks to the local environment).

APPLICATION:

Divinol High Liquid Surface is a high quality concrete release agent for the production of exposed concrete in civil engineering , and achieves excellent results, especially with smooth and demanding surfaces. The formation of pores and shrinkholes is reduced significantly when using Divinol High Liquid Surface.

Hydrophilic additives lower the surface tension of the release agent and can be mounted easily on the formwork and offer an excellent wetting.

Divinol High Liquid Surface is especially suitable for all-plastic formworks as well as plastic-coated formworks based on polypropylene. Use on heated formworks is possible.

The product can also be used in machines as well as in construction and transport vehicles.

Divinol High Liquid Surface can be applied as delivered by spraying, brushing and rolling.

When used as intended, Divinol High Liquid Surface has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).

STORAGE:

• Consumption:
  • Depending on the type of formwork (absorbent, non-absorbent) approx. 8-30 g/m².

• Processing:
  • The formwork must be pre-cleaned and dry. Divinol High Liquid Surface is sprayed evenly and thinly with a high-pressure sprayer at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.