Description

eni aquamet SBH is a clear, water soluble, low foaming, mineral oil, heavy metal and boric acid free EP cooling lubricant. High grinding quality due to fully synthetic anionic and non-ionic lubricant components and highly effective corrosion inhibitors.

Properties and Performance:

good cooling properties, good observation of the grinding process
very good wetting and rinsing efficiency, effective corrosion protection
long application service life, absolutely low foam tendency
no sticky residues
suitable for extremely soft water
most difficult grinding operations are accomplished

Applications:

eni aquamet SBH is a coolant solution especially for the grinding of cast iron, tempered and hardened steel and free cutting steel. The pH value should not be lower than 8,6. Recommended measures have to be started at deviations.

Recommended application concentration: 3 - 5% depending on the material

Factors: Refractometer - 1,4

Indications:

The product meets the requirements of the TRGS 611 Section 4. Please observe the valid VDI Guidelines 3035 and 3397 (1-3) as well as the Regulations of the TRGS 611 Section 5 for the application. When mixing always give the concentrate into the water, a more homogeneous emulsion is achievable by using an automatic mixing unit. A frost-free storage is necessary to maintain the functionality of the cooling lubricant concentrate. The product is a water hazardous liquid. The occupational medical precautions have to be observed according to GefStoffV (Ordinance on Hazardous Substances) §15, §16 and annex V.

The BG (professional society) regulation 143 - operations with cooling lubricants - has to be observed for a safety operation.

For specific technical questions please contact our technical department. Get information in reference to our training seminar about the subject cooling lubricants.