Divinol High Liquid

Concrete release agent specially made for GfK formwork facing and coated formwork for high-quality concrete parts

PRODUCT DESCRIPTION:

• non water-miscible concrete release agent
• solvent-free
• for high-quality fair-faced concrete parts
• of low viscosity
• economical consumption
• reduces formation of pores and shrinkholes

APPROVAL:

As part of a DGNB certification, Divinol High Liquid can be used for quality level 1 (according to the catalog of criteria ENV 1.2 - risks to the local environment).

APPLICATION:

Due to high quality base oils Divinol High Liquid can be used for the production of quality concrete parts. The product is suitable for different kinds of formwork, e. g. wood as well as coated formworks in the civil construction sector. Well suited for polyurethane and GFK frameworks (Reckli, Noe).

Divinol High Liquid can also be used as mixer protection in machines, construction and transport vehicles and as asphalt release agent.

The use of Divinol High Liquid guarantees an easy and clean demoulding as well as optimum surface results. Divinol High Liquid can be applied as delivered by spraying, brushing and rolling as thin as possible. When used as intended, Divinol High Liquid has no negative influence on the subsequent treatments of the concrete surfaces (plaster, tiles, wallpaper, colour).

STORAGE:

Divinol High Liquid is insensitive to frost and can be used in any weather without any problems. Protect from strong sunlight. Store opened containers closed. If stored properly, it will last for at least 3 years.

MISCELLANEOUS:

• Consumption:
  • Depending on the type of formwork (absorbent, non-absorbent) approx. 8-30 g/m².

• Processing:
  • The formwork must be pre-cleaned and dry. Divinol High Liquid is sprayed evenly and thinly with a highpressure sprayer at 4-6 bar. Avoid accumulation of release agents. Concrete can be poured immediately after spraying.